亚洲成AV人片在AV_国外中文字幕无码视频_97色在线观视频免费_国产精品自产拍在线网站

Welcome SANCHOW?CHEMICALS?CO.,?LTD HomePage!
Serive Tel:13928160655
+86-719-5716269
Sanchow
contact us
CEO:Mr?Zhou
Mobi:13928160655
Tel:+86-719-5716269
Fax:+86-719-5716329
Mail:13597868869@163.com
Addr:LIULIPING,?SHIYAN,?HUBEI?442716,?CHINA
MR-101
Product Details

TECHNICAL DATA

SANCHOW RELEASE AGENT

MR-101

 

INTRODUCTION

SANCHOW release agent is the product of Sanchow Chemicals Co., Ltd for use in the molding of unsaturated polyester resins and vinylester resins.

SANCHOW release agent is primarily recommended as internal release additive for use in those types of molding operations where external heat is applied during the curing cycle and are not recommended generally for room temperature curing systems.

SANCHOW release agent is incorporated directly into the resin eliminating the need for an external mold release agent, improving resin flow and line speeds, reducing release agent cost on a utility basis when compared with other, more conventional internal release agents. An effective addition of SANCHOW release agent will not have any adverse affect on the curing and cured resin. It will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating. It can also protect ferrous metal molds from corrosion during storage. It is especially effective when used in low shrink polyester or vinylester resins which produce exceptionally smooth surfaces when cast.

PROPERTIES

Chemical Composition

Organic Phosphate

Effective Ingredients

100%

Physical Appearance

Pale Yellow Liquid

Odor

Mild, fatty alcohol

Density

0.98g/ml @25C

Viscosity

175cps @25C

PH, 1% in deionized water

1~3 @25C

Flash Point

Non Flammable

Solubility

Miscible with UP and VE resins

Shelf Life

Minimum of one year

  

 

 

 

All information given by us about our products is based upon our tests and experience. It is intended for use by persons having technical skill at their own discretion and risk, and we assume no liability in connection with their use.

 

 

APPLICATION INSTRUCTIONS

General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. SANCHOW release agent is effective with a range of 0.5 to 1.5 parts per 100 resin by weight, excluding reinforcements, pigments and fillers. High amount of filler may require a higher percentage of internal release than the indicated maximum.

Mixing: Mix into resin prior to addition of catalysts, fillers, and other resin additives.

PERSONAL SAFETY AND FIRST AID   

Health Hazards: MR-101 causes burns to the eyes and skin. Undiluted, it is corrosive to rabbit skin. It has a low acute oral toxicity.

Safety Precautions: Do not get it in the eyes or on the skin. Use rubber gloves and adequate eye protection.   

First Aid: In case of contact, flush the eyes or skin immediately with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before reuse.

STORAGE AND HANDLING

It should be stored in a cool dry place and kept closed to prevent contamination.

 

 

Sanchow Chemicals Co., Ltd

Add: Liulipin, Shiyan, Hubei 442716, China

Tel: +86-719-5716269

Fax: +86-719-5716329

E-mail: 13597868869@163.com